Liberty: There is No Greater Cause

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Archive for the tag “Rifle”

Custom Rifle Project Complete: Photo Gallery | LongRifles, Inc., Stiller, Brux, Manners, Jewell, Bushnell, Seekins, JEC Customs, Atlas

The rifle build is finally complete, and I was greeted to a gun case on my doorstep Saturday with a return address of LongRifles, Inc.

To say that the care in packaging taken by the folks at LRI was superb and left nothing to chance, would still be an understatement. Every piece, down to each piece of the scope rings, was in a ziplock plastic bag, inside a sealed paper bag, and wrapped in at least twice as much bubble wrap as would get the job done. The case itself was sealed with duct tape and had a zip tie through each of the 6 hasps for locks. Needless to say, everything arrived to perfect condition. The 2-day shipping was a bonus too!

I began putting some copper and lead into some brass today to work up to and find max pressure loads for this rifle, using H4350 of course. I also put together 10 lower pressure rounds to entertain myself a bit until I have the time for extensive load work-up. I’ll give a short update after I shoot it, but more in-depth shooting and reviews will be on hold until after my 3 week (hopefully less!) archery elk hunt set for the fast approaching beginning of September.

Here’s some eye candy, click each thumbnail for high-resolution pics as always.

Read more…

Advertisements

Custom Bolt Action Precision Rifle Build (Part 6) | Optics: Bushnell Elite Tactical ERS 3.5-21x50mm, Seekins Precision, Accuracy 1st

Bushnell G2DMR Reticle

Bushnell G2DMR Reticle

Well this is the last piece of the puzzle of a rifle I’ve been assembling since the start of this series. In this installment we will go over my selections regarding Optics; that includes the scope, rings, caps, and a bubble level. I left out the base, as I used the 20 MOA base included with the Stiler Tac-30 A/W action I used as the basis of the build

We’ll dive into these details in just second, but if you haven’t been following the series you can find the first installment here, and the links to every part are at the end of this post, so be sure to check them all out.

OPTICS SELECTION

Optics play an extremely important role in your system, and they need to perform in all situations as well as any piece of your system. The performance standards I was looking for in this rifle, were selected to fill it’s intended role. The same applies to optics. To start my process, I sat down and decided what I wanted out of this scope in each technical and performance metric, and the following short list is what I came up with:

  • Quality glass that would allow high-resolution out to 1000 yards
  • Mil Reticle with Mil Turrets
  • First Focal Plane Reticle
  • A lifetime warranty yet a reputation of not needing to use it
  • Reticle with ranging abilities to the 1/10th mil, and fast target acquisition
  • Ability to dope wind/elevation in the reticle preferred but not required
  • Magnification on the high-end of 16x and on the low-end 4x or lower
  • Zero-Stop preferred not required
  • ‘High Speed’ 10 mil knobs preferred not required
  • Weight is not an issue
  • Illumination not needed

Read more…

Custom Bolt Action Precision Rifle Build (Part 5) | Gunsmith Selection: Longrifles, Inc.

I received my phone call yesterday that this rifle’s barreled action is complete at the gunsmith and headed back my way! I decided I needed to get this post together on my riflesmith selection before it arrives. Otherwise else I’ll be too ‘giggity‘ to write this post well, wanting instead to move on to other things like shooting instead of writing!

If you haven’t been following the series, the first post is here, and you can follow along from there. I have been chronicling just about every equipment decision in this build and if this is your first glimpse of it, you’ve started off near the end. So do yourself a favor and go back and check them all out when you are done here. Every installment in the series is linked at the end of this post.

GUNSMITH SELECTION

All these complementing pieces that I’ve gathered do a man absolutely no good if they aren’t properly assembled by a rifle artist/engineer, more commonly known as a gunsmith. I have taken up countless hours making sure I wrang out the exact performance standards I am looking for with each component selection of the build, but it is all for naught if your gunsmith isn’t up to snuff. This is not the place to just haul your gear down to the nearest guy with a lathe and bickering over price, though deals can be had.

There is really only one way to select a gunsmith, and that is on his reputation amongst discerning customers and shooters that have been around the sport long enough to have seen builders rise and fall and know what to look for. If someone who shoots for a living (at hajis, paper, or steel)  will give someone a recco, it’s a good time to start listening. That isn’t to say you need to pick the oldest, longest running rifle builder around, there are new people doing great things in all industries every day. But if you can garner the opinion of folks that shoot, see the results on paper or in the field of multiple builds from multiple gunsmiths, you’ll start to get an idea of the lay of the land. There are lots of quality gunsmiths for the picking, and as long as you find one of the good ones, you should be a happy camper.

Read more…

Custom Bolt Action Precision Rifle Build (Part 4) | Jewell Trigger, JEC Muzzle Brake, and Accessories

DSC01709top

Thank you to everyone who has been following this series, your loyalty makes me smile 🙂

In this week’s post, I’ll cover a few of the ‘small’ (not necessarily cheap!) pieces of the puzzle that wrap up the component selection for the rifle itself: trigger, muzzle break, bipod, and some accessories. Then I’ll share a few photos of the build ‘mocked’ together so you can get a feel for the final product.

But first, a few links to the prior pieces for those that are joining us late.

Part 1: Rifle Purpose, Platform choice: Stiller Action

Part 2: Barrel Caliber and Reamer Selection: Brux Barrels, 6.5 Creedmoor, Reamer Specs

Part 3: Stock/Chassis Selection: Manners T4-A Stock with Mini-Chassis and Paint

Alrighty folks, I’m sure your getting antsy, as I am, so onward we go!

TRIGGER SELECTION

Along with your rifle stock/chassis and optics, your trigger selection and setup will be your direct line of interaction with the rifle. The trigger is the happy switch, the piece of the puzzle that makes the magic happen, and an integral part of your platform. There is no other piece of equipment that can so quickly ruin your accuracy potential than your trigger, so care must be taken in selecting it and tuning it for the role you need it to fit.

Read more…

Custom Precision Rifle Build (Part 3) | Stock/Chassis Selection: Manners T4-A Stock

Hopefully some of you have enjoyed the first two parts of this series. Part 1 is Here, and Part 2 is Here, for those that have somehow found part 3 without the proper introduction to the series.

In this installment I’m going to address my choice for a stock/chassis system with this build. I’ll save optics selection, the small pieces that round out a build, and my choice of gunsmith for later posts. Without further ado.

Stock Photo: Manners T4-A rifle stock.

Stock Photo: Manners T4-A rifle stock.

RIFLE STOCK/CHASSIS

Selecting a stock/chassis system for this build was difficult for me. There are so many seemingly excellent options out there, and I have never, and had no access to, put my hands on any of them. I relied heavily on first hand user reviews, and crowd sourced reviews from forum posts and the like, mostly on snipershide.com. This choice was also an exciting one for me because I am a tall lanky SOB and have never really had a gun stock that fit right. My goose neck, and long arms just don’t jive with factory equipment built for the ‘average adult male’ client. So adjust-ability was high on my list of wants. The stock also makes the look and feel of the rifle, so in essence it is one of the most important selections for shoot-ability, repeat-ability, and likability of your system. If you cannot line up behind your weapon comfortably the same way every time and properly place your natural point of aim on target with a few tweaks of your body position, your results will show downrange. With weight not being a big factor in this build, the options were seemingly endless.

From Top: Whiskey 3, ZLR, and Mcrees Chassis Systems

From Top: Whiskey 3, XLR, and Mcrees Chassis Systems

Plenty more after the break. Read more…

Post Navigation

The Joy of Moldings.com

How to decorate your home with moldings -- DIY or hire a pro.

Nomocracy In Politics

Liberty, Prudence, Imperfection, and Law

PrecisionRifleBlog.com

A DATA-DRIVEN Approach to Precision Rifles, Optics & Gear

Liberty Patriot

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Mark America

Rebuilding America With Actual Conservatism

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Notes On Liberty

Spontaneous thoughts on a humble creed

John Lott's Website

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

III Arms

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

The Brave New World

Information is the key to Victory!

Open Carry Texas

Quemadmoeum gladis nemeinum occidit, occidentis telum est!!

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

TL In Exile

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

III Percent Patriots

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Law of Self Defense

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Le·gal In·sur·rec·tion

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Building KUIU

Follow and contribute to the process...

The Truth About Guns

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

The Last Refuge

Rag Tag Bunch of Conservative Misfits - Contact Info: TheLastRefuge@reagan.com

The WordPress.com Blog

The latest news on WordPress.com and the WordPress community.