Liberty: There is No Greater Cause

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Archive for the tag “Shooting”

Custom Rifle Project Complete: Photo Gallery | LongRifles, Inc., Stiller, Brux, Manners, Jewell, Bushnell, Seekins, JEC Customs, Atlas

The rifle build is finally complete, and I was greeted to a gun case on my doorstep Saturday with a return address of LongRifles, Inc.

To say that the care in packaging taken by the folks at LRI was superb and left nothing to chance, would still be an understatement. Every piece, down to each piece of the scope rings, was in a ziplock plastic bag, inside a sealed paper bag, and wrapped in at least twice as much bubble wrap as would get the job done. The case itself was sealed with duct tape and had a zip tie through each of the 6 hasps for locks. Needless to say, everything arrived to perfect condition. The 2-day shipping was a bonus too!

I began putting some copper and lead into some brass today to work up to and find max pressure loads for this rifle, using H4350 of course. I also put together 10 lower pressure rounds to entertain myself a bit until I have the time for extensive load work-up. I’ll give a short update after I shoot it, but more in-depth shooting and reviews will be on hold until after my 3 week (hopefully less!) archery elk hunt set for the fast approaching beginning of September.

Here’s some eye candy, click each thumbnail for high-resolution pics as always.

Read more…

Custom Precision Rifle Build (Part 3) | Stock/Chassis Selection: Manners T4-A Stock

Hopefully some of you have enjoyed the first two parts of this series. Part 1 is Here, and Part 2 is Here, for those that have somehow found part 3 without the proper introduction to the series.

In this installment I’m going to address my choice for a stock/chassis system with this build. I’ll save optics selection, the small pieces that round out a build, and my choice of gunsmith for later posts. Without further ado.

Stock Photo: Manners T4-A rifle stock.

Stock Photo: Manners T4-A rifle stock.

RIFLE STOCK/CHASSIS

Selecting a stock/chassis system for this build was difficult for me. There are so many seemingly excellent options out there, and I have never, and had no access to, put my hands on any of them. I relied heavily on first hand user reviews, and crowd sourced reviews from forum posts and the like, mostly on snipershide.com. This choice was also an exciting one for me because I am a tall lanky SOB and have never really had a gun stock that fit right. My goose neck, and long arms just don’t jive with factory equipment built for the ‘average adult male’ client. So adjust-ability was high on my list of wants. The stock also makes the look and feel of the rifle, so in essence it is one of the most important selections for shoot-ability, repeat-ability, and likability of your system. If you cannot line up behind your weapon comfortably the same way every time and properly place your natural point of aim on target with a few tweaks of your body position, your results will show downrange. With weight not being a big factor in this build, the options were seemingly endless.

From Top: Whiskey 3, ZLR, and Mcrees Chassis Systems

From Top: Whiskey 3, XLR, and Mcrees Chassis Systems

Plenty more after the break. Read more…

Building My First Custom Bolt Action Precision Rifle (Part 2) | Barrel Blank, Caliber, and Reamer Selection: Brux Barrels, 6.5 Creedmoor, Reamer Specs

This is Part Duex in my installment of my Precision Rifle Build series that I started last week. At the time, we went over the thought process of what role the rifle would fill and the selection of an action for the basis of the build. As the day gets closer that the completed rifle will show up on my door step fully assembled and begging for a range trip, I’ll take you a few steps farther along my journey. First up today, caliber selection.

CALIBER SELECTION

This is a tough one for most newbies, including myself. The sheer number of cartridges and wildcats can be mind-boggling, and often causes paralysis by over-analysis. In 6mm alone someone is looking at 243 Win, 243 AI, 6XC, 6BR, 6PPC, 6 Remington, 6/284, 6mm-06, 6mm-06 AI, and on and on and on. Choices can be difficult.

CartridgeComparisonGuide[1]

Continue reading after the break. Read more…

Building My First Custom Bolt Action Precision Rifle (Part 1) | Rifle’s Purpose, Platform Choice: Remington 700 Clone: Stiller Tac30 A/W Action

A few months ago, for no particular reason I decided I wanted to try my hand at true marksmanship. I have never been what I would consider “a good shot” but I get by. But I have missed enough times, that I have reduced confidence and assume a miss with every pull of the trigger. Sure, the ‘right’ way to go about this is to grab a quality 22 LR and head to the range testing and building your skills, but let’s be honest, we live in a NOW society and I want some instant gratification. This led me down the road of spending more money then I imagined on building a custom precision rifle.

The draw of building the rifle, selecting the goal, the intended purpose, the parts, the gunsmith, intrigues me as much as the rifle itself and the shooting to come later. I just simply love diving into a project like this with obsession-like motivation and learning as much as one possibly can while attempting to maximize the performance of each selection. In this post, I will outline some of those selections I made and my rationale for doing so. This doesn’t mean I did anything the way you should, or that my way is correct in any manner. It’s just my anecdote.

In no way to I believe this rifle itself will make me a better shooter, only proper practice and instruction will do that. But it is an excuse to let out my inner ‘gear junkie’ and spend some hard earned cash. Once complete, with no possible way to blame my equipment, we’ll see if I can build my marksmanship skills into something to be proud of, or not.

Interested? Read more…

Post Navigation

The Joy of Moldings.com

How to decorate your home with moldings -- DIY or hire a pro.

Nomocracy In Politics

Liberty, Prudence, Imperfection, and Law

PrecisionRifleBlog.com

A DATA-DRIVEN Approach to Precision Rifles, Optics & Gear

Liberty Patriot

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Mark America

Rebuilding America With Actual Conservatism

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Notes On Liberty

Spontaneous thoughts on a humble creed

John Lott's Website

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

III Arms

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

The Brave New World

Information is the key to Victory!

Open Carry Texas

Quemadmoeum gladis nemeinum occidit, occidentis telum est!!

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

TL In Exile

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

III Percent Patriots

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Law of Self Defense

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Le·gal In·sur·rec·tion

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

Building KUIU

Follow and contribute to the process...

The Truth About Guns

“Extremism in the defense of liberty is no vice; moderation in the pursuit of justice is no virtue.”

The Last Refuge

Rag Tag Bunch of Conservative Misfits - Contact Info: TheLastRefuge@reagan.com

The WordPress.com Blog

The latest news on WordPress.com and the WordPress community.